cve,link,title,description,vendor,products,score,severity,epss,cisa,cisa_published,article,ransomware,exploited,poc,trended,trended_no_1,published,trended_score
CVE-2021-37199,https://securityvulnerability.io/vulnerability/CVE-2021-37199,,"A vulnerability has been identified in SINUMERIK 808D (All versions), SINUMERIK 828D (All versions < V4.95). Affected devices don't process correctly certain special crafted packets sent to port 102/tcp, which could allow an attacker to cause a denial-of-service in the device.",Siemens,"Sinumerik 808d,Sinumerik 828d",7.5,HIGH,0.0010300000431016088,false,,false,false,false,,false,false,2021-10-12T09:49:37.000Z,0
CVE-2018-11459,https://securityvulnerability.io/vulnerability/CVE-2018-11459,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker could modify a user-writeable configuration file so that after reboot or manual initiation the system reloads the modified configuration file and attacker-controlled code is executed with elevated privileges. The security vulnerability could be exploited by an attacker with local access to the affected system. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",7.8,HIGH,0.0004199999966658652,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2018-11461,https://securityvulnerability.io/vulnerability/CVE-2018-11461,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker with user privileges could use the service command application for privilege escalation to an elevated user but not root. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",6.6,MEDIUM,0.0004199999966658652,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2018-11462,https://securityvulnerability.io/vulnerability/CVE-2018-11462,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). By sending a specially crafted authentication request to the affected systems a remote attacker could escalate his privileges to an elevated user account but not to root. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",9.8,CRITICAL,0.003710000077262521,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2018-11465,https://securityvulnerability.io/vulnerability/CVE-2018-11465,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker could use ioctl calls to do out of bounds reads, arbitrary writes, or execute code in kernel mode. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",7.8,HIGH,0.0004199999966658652,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2018-11460,https://securityvulnerability.io/vulnerability/CVE-2018-11460,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker with elevated user privileges (manufact) could modify a CRAMFS archive so that after reboot the system loads the modified CRAMFS file and attacker-controlled code is executed with root privileges. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires elevated user privileges (manufact) but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",7.8,HIGH,0.0004199999966658652,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2018-11466,https://securityvulnerability.io/vulnerability/CVE-2018-11466,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). Specially crafted network packets sent to port 102/tcp (ISO-TSAP) could allow a remote attacker to either cause a Denial-of-Service condition of the integrated software firewall or allow to execute code in the context of the software firewall. The security vulnerability could be exploited by an attacker with network access to the affected systems on port 102/tcp. Successful exploitation requires no user privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",9.8,CRITICAL,0.014229999855160713,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2018-11463,https://securityvulnerability.io/vulnerability/CVE-2018-11463,,"A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A buffer overflow in the service command application could allow a local attacker to execute code with elevated privileges. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.",Siemens,"Sinumerik 808d V4.7, Sinumerik 808d V4.8, Sinumerik 828d V4.7, Sinumerik 840d Sl V4.7, Sinumerik 840d Sl V4.8",7.8,HIGH,0.00044999999227002263,false,,false,false,false,,false,false,2018-12-12T16:00:00.000Z,0
CVE-2017-6865,https://securityvulnerability.io/vulnerability/CVE-2017-6865,,"A vulnerability has been identified in Primary Setup Tool (PST) (All versions < V4.2 HF1), SIMATIC Automation Tool (All versions < V3.0), SIMATIC NET PC-Software (All versions < V14 SP1), SIMATIC PCS 7 V8.1 (All versions), SIMATIC PCS 7 V8.2 (All versions < V8.2 SP1), SIMATIC STEP 7 (TIA Portal) V13 (All versions < V13 SP2), SIMATIC STEP 7 (TIA Portal) V14 (All versions < V14 SP1), SIMATIC STEP 7 V5.X (All versions < V5.6), SIMATIC WinAC RTX 2010 SP2 (All versions), SIMATIC WinAC RTX F 2010 SP2 (All versions), SIMATIC WinCC (TIA Portal) V13 (All versions < V13 SP2), SIMATIC WinCC (TIA Portal) V14 (All versions < V14 SP1), SIMATIC WinCC V7.2 and prior (All versions), SIMATIC WinCC V7.3 (All versions < V7.3 Update 15), SIMATIC WinCC V7.4 (All versions < V7.4 SP1 Upd1), SIMATIC WinCC flexible 2008 (All versions < flexible 2008 SP5), SINAUT ST7CC (All versions installed in conjunction with SIMATIC WinCC < V7.3 Update 15), SINEMA Server (All versions < V14), SINUMERIK 808D Programming Tool (All versions < V4.7 SP4 HF2), SMART PC Access (All versions < V2.3), STEP 7 - Micro/WIN SMART (All versions < V2.3), Security Configuration Tool (SCT) (All versions < V5.0). Specially crafted PROFINET DCP broadcast packets sent to the affected products on a local Ethernet segment (Layer 2) could cause a Denial-of-Service condition of some services. The services require manual restart to recover.",Siemens,"Primary Setup Tool (pst),Simatic Automation Tool,Simatic Net Pc-software,Simatic Pcs 7 V8.1,Simatic Pcs 7 V8.2,Simatic Step 7 (tia Portal) V13,Simatic Step 7 (tia Portal) V14,Simatic Step 7 V5.x,Simatic Winac Rtx 2010 Sp2,Simatic Winac Rtx F 2010 Sp2,Simatic Wincc (tia Portal) V13,Simatic Wincc (tia Portal) V14,Simatic Wincc V7.2 And Prior,Simatic Wincc V7.3,Simatic Wincc V7.4,Simatic Wincc Flexible 2008,Sinaut St7cc,Sinema Server,Sinumerik 808d Programming Tool,Smart Pc Access,Step 7 - Micro/win Smart,Security Configuration Tool (sct)",6.5,MEDIUM,0.0006799999973736703,false,,false,false,false,,false,false,2017-05-11T10:00:00.000Z,0